Abby rug in gray Ophelia & Co. Carpet size: runner 600 x 80 cm
Staple Carpet on Stairs

Staple Carpet on Stairs

Ophelia & Co.

This indoor carpet runner is made using needle stitch technology. A needle punched carpet is a manufacturing process in which many short staple fibers are glued together while being punched with a barbed needle, hence the name punched needle. Typically, this type of carpet is used in offices, schools, airports, etc. Very little can go wrong, they don’t pull or hang, and they don’t kick or push off. The pile on this carpet runner is extremely durable and will not flatten as there is no pile for it. You

If you want to install carpet in your home, you may also want to install it on your staircase. If you want to install it on your staircase, you will find that you need a stapler to staple it. Therefore, you will need some tools such as a staple gun and staples to install it permanently.

If you want to staple the carpet yourself, you should use a certain technique to prevent the carpet from sagging. The sagging carpet is usually on stairs. The right technique also prevents foot injury or pain from protruding staples. The following are the things you should do to staple the right rug.

The first thing you should do is to use a single premade and pre-cut carpet roll for the straight staircase. This will allow you to drape it over the ends of the stairs. This completely covers the stairs. This also ensures that the carpet always stays in place. But you can also install a carpet at every step.

The second thing you should do is lay the carpet and attach it to the top of the stairs. Then you should work to the next landing. Attach the carpet with a tack-free strip. You will find that this will keep it in place.

The third thing you should do is stretch the carpet so that it is over to the first step. Then you should pull the hook and the tension of the carpet into the tack-free strip. The strip is at the bottom of the first rise from the stairs.

The fourth thing you should do is place the stapler on the edge of the rug along the outside edges of the rug. Then you should pull back the fibers of the carpet.

The next thing you should do is release the staple by pressing the trigger. Be sure to direct the staple into the carpet. After that you should check if the staple is visible or not. You should retract it if you can see or feel the staple. Then you should insert another staple after retraction. You should continue to staple the carpet every two inches. However, you must make sure that you do not staple the middle part of the steps.

The last thing you should do is push the staples so that they are completely hidden. If no staples are visible, you can safely step on it.